Hello, I would like to use the JS110 to measure the real capacity of a battery. Is there a way to set an under-voltage or cut-off voltage threshold for when to turn the power off and stop the measurement? The battery is connected to the IN terminals and a load resistor to the OUT terminals. Thank…

Hi @Romain and welcome to the Joulescope forum! The Joulescope UI does not have this feature, but it is easy using a Python script. See the new battery_discharge.py example. You run it like this: python battery_discharge.py 3.0 And here is the output with a 1 kΩ load and me manually changing t…

Using JS to measure battery capacity

Technical Discussion

Romain September 30, 2024, 2:25pm 6

device.parameter_set('i_range', 'off')

I confirm it does turn off the load now. Thanks !

I created a separate thread about the firmware update: JS110 Firmware update

1 Like

Topic		Replies	Views
Reverse currents Technical Discussion	6	799	July 26, 2021
Battery discharge/charge application question Technical Discussion	2	952	July 29, 2019
Measure accumulated battery usage in IOT device Technical Discussion	4	177	July 23, 2024
Joulescope JS110 measured current too high Issues	18	413	November 23, 2022
Joulescope data logging Technical Discussion	36	9086	December 17, 2022

Using JS to measure battery capacity

Related topics